7
●
10
●
Clean the strainer periodically.(fig.10)
MAINTENANCE GUIDE
Daily maintenance
Attention
When the cleaning work is over:
1.Disconnect the machine socket from the battery socket.
2.Drain the soiled water from the recovery tank and wash it with clean water.
3.Check to make sure the water suction hose is clear.
4.Wash the brushes and squeegees, and air-dry them.
1.Maintain the recovery tank
●
Clean the recovery tank every time the cleaning work is finished.
fig.10
Strainer
fig.9
Vacuum
hose
Solution
tank lid
Solution
tank
Recovery tank lid
Drain hose
Recovery
tank
①
②
③
④
Take out the vacuum hose and the drain hose from the recovery tank lid. Then, pull out
the whole recover tank to separate it from the machine.
Loose the two recovery tank lids and turn over the recovery tank to discharge all the
soiled water.
Use the clean water to wash the recovery tank and air-dry it. Take care of preventing
sludge or foreign objects from blocking the water.
After cleaning the recovery tank, fasten the two recovery tank lids. After that, push the
recovery tank into the machine. Finally, connect the vacuum hose and the drain hose
with the mouth of the recovery tank.
2.Maintain the solution tank
If the machine stay idle for long time, open the solution tank lid and quick connector to
discharge all the solution water in the solution tank in case of solution in the tank
deteriorates(fig.12).
If the machine will be transported or stored when the environment temperature is less than
4
fter this, twist down the ball valve.
Then press the sprinkling button to sprinkle all the water stayed in the sprinkling system
(fig.11). Otherwise, water may freeze and damage the sprinkling motor, solenoid valve, and
hoses because of lower water temperature.
℃
, discharge all the solution water in the solution tank. A
●
Notes before using
Don’ts
Guangdong
Baiyun
Cleaning
Group
Co.,Ltd.
