16
STARTING THE ENGINE
Before attempting to start the engine, make sure to follow these steps.
1. Insert the ignition key and turn it to the “ON” position.
2. Turn the fuel valve to “ON”.
3. Place the engine stop switch in the “RUN” position.
4. Pull the clutch lever on the left handlebar all the way in.
5. Push the “START” button.
6. Push the throttle lever lightly.
7. Step down on the shift lever to put the ATV in first gear. (See Basic Movement
and Shifting on page 20 for to learn how to properly shift gears)
WARNING
The ATV could start moving as soon as you start the engine.
Unexpected movement could cause you to lose control of the ATV.
Be sure to set the parking brake before you start the engine.
WARNING
Running your ATV indoors where there is little or no ventilation could be hazardous.
Breathing in exhaust gases from the ATV could cause severe injury.
Always run your ATV outdoors where there is fresh air.
WARNING
Carrying a passenger on this ATV could be
hazardous.
Carrying a passenger could greatly reduce your
ability to keep balance. If you carry a passenger,
you could lose control, and both you and the
passenger could be severely injured.
Never carry a passenger. The ATV has a long
seat so you can change positions to handle the
ATV. It is not for carrying passengers.
BASIC MOVEMENT AND SHIFTING