20
When you are sure that the engine is warm, release
the front brake and apply the rear brake.
Release the rear brake lever and gradually open the
throttle while slowly releasing the clutch.
When the ATV’s speed has increased, pull the
clutch back in quickly and release the throttle,
then “toe up” the gearshift lever to put the vehicle
in 2nd gear. Repeat this procedure to use the
rest of the gears (1 through 5).
WARNING
The ATV may start moving as soon as you release the parking brake.
Unexpected movement could cause you to lose control of the ATV.
Make sure to apply the rear brake before you release the parking brake.
WARNING
While learning, always practice in open, level areas.
Ensure that the engine is warm, release the front brake.
With the rear brake and clutch still engaged, push down on the shift pedal to
place the ATV in first gear.
Slowly let out the clutch lever and gently push the throttle lever to make the
ATV move forward.
SHIFT PATTERN
N