41
IDLE SPEED ADJUSTMENT
To adjust the idle speed properly, you need a tachometer. If you do not have one, ask
your authorized service center to perform this adjustment.
To adjust the idle speed:
1. Start the engine and warm it up.
2. Turn the throttle stop screw
in or out so that the engine idle speed is at
1250~+-125 r/min.
FUEL HOSE
WARNING
Improper adjustment of the idle speed could be hazardous.
An idle speed that is too high could cause the ATV to launch forward when you
start the engine. This may cause an accident. Excessive engine wear may also
result if idle speed is adjusted improperly or when the engine is not fully warmed
up. Adjust the idle to the correct speed. Make sure the engine is fully warm
before adjusting the engine idle speed.
Inspect the fuel hose for damage and
fuel leakage. If ay defects are found,
the fuel hose must be replaced.