26
CHANGING ENGINE OIL, CLEANING OIL FILTER SCREEN
1. Remove Oil drain plug (1) located at the bottom left side of the engine and
let oil drain into an approved collection container. DO NOT PERFORM
THIS PROCEDURE WHILE THE ENGINE IS HOT. SERIOUS BURNS
COULD RESULT FROM CONTACT WITH HOT OIL.
2.
Remove the Oil filter plug (2), spring (3) and oil filter screen (4) located at
the bottom right side of the engine and let the oil drain into an approved
collection container. DO NOT PERFORM THIS PROCEDURE WHILE THE
ENGINE IS HOT. SERIOUS BURNS COULD RESULT FROM CONTACT
WITH HOT OIL.
3. Dispose of used oil properly. For proper disposal procedures, contact
your local oil recycling center
4. Clean oil screen (4) and spring (3) with solvent
5.
Clean and re-install the Oil drain Plug (1), Oil filter plug (2) with spring (3)
and Oil filter (4). Screw in tightly.
6.
Refill the engine with the proper amount and grade of oil. Re-check the
amount of oil on the dip stick.
1
2
4
3
Maintenance (continued)
