Baja Products Whitewater XS, Owner'S Manual

The In-House Control Panel shares the same functions and has the same 
features as the spaside control panel located within the spa.

The In-House Control Panel can be located up to 300 feet from the spa.   It 
can be conveniently installed inside your house for full access to your spas 
features. 

For your convenience and comfort, you can install numerous In-House 
Control Panels. All remote control panels have complete control of the 
operation and programming of your spa equipment.

To insure a successful installation, please refer to the In-House Control Panel Installation Guide (85-0343).

This In-House Control Panel can control the system in conjunction with the control on the spaside, OR AS THE ONLY 
CONTROL FOR THE SPA.   In other words, this control can be the primary or secondary spa control. 

IN-HOUSE CONTROL PANEL (OPTIONAL)  

BAJA BREEZE AROMATHERAPY 

Baja Breeze Aromatherapy restores balance and harmony to all your senses with fresh aromatherapy spa scents.   
To install Baja Breeze scents simply, 
1.

Turn off the Booster pump

2.

Unscrew Baja Breeze aromatherapy cap located on top of spa

3.

Place aromatherapy scents (pack or bag) into canister 

4.

Screw top back onto Baja Breeze aromatherapy 

5. 

Turn on Booster pump and Turbostream™ jet and open Air Controller next to Baja Breeze Aromatherapy                             
cannister to activate scent

Refer to spa scent manufactures recommendations for scent replacement schedule. 

FILTER REMOVAL:

JET OPERATION:

Open air control fittings when in HIGH 
speed Jets mode. 

To install (optional) Euro'ssage™, turn 
Magna Jet counterclockwise and pull
straight out then turn Euro’ssage™ slightly 
clockwise until you feel it click into place.  

Turn outer ring to direct flow from 
TurboStream® to Magna Jets.  Each
TurboStream® jet controls bucket 
seat jets.

Pull tab and turn lock ring counterclockwise.  Remove filter
lid and cartridge. After cleaning filter, bleed air out of the filter 
cavity by opening the air relief valve & turn on Circulation Pump.

Note:  See Page 13 for cleaning instructions before removing filter.

JET & FILTER  OPERATION

ON

OFF

ON

OFF

12