12
Baja
™
BA300
I I . YO U R S C O O T E R
Storage Compartments
Your scooter is equipped with two storage
compartments. One is located on the tiller beneath
the LCD Display, and the other is a storage
compartment located in the rear shroud below the
seat.
To access the rear storage compartment:
1. Ensure that the seat is in the rearmost
position before attempting to access the rear
storage compartment to avoid possible shroud
interference.
2. Ensure that your scooter is powered down and
the key is removed from the key switch before
accessing rear storage.
3. Place the key into the key lock and turn it
clockwise to unlatch the seat, then flip the
seat forward to access the rear storage
compartment.
4. Once the seat is flipped forward, engage the
seat support rod on the left side to secure the
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your
scooter’s batteries into the controlled mechanical energy that drives the scooter’s wheels.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your scooter. They are bolted to the
frame at the rear of the scooter.
PROHIBITED! Do not remove anti-tip wheels or modify your scooter in any way that is not authorized
by your dealer.
WARNING! The anti-tip wheels may cause interference with the smooth transition of your scooter
when ascending or descending a curb. Contact yout authorized dealer for more information.
seat in place.
See figure 6.
5. To close the storage compartment, disengage the seat support rod, and slowly lower the seat back
into position. Remove the key from the key lock.
WARINING: Use extreme caution when flipping the seat up. The seat on your scooter is heavy. If you
are unable to lift it comfortably, be sure to get help.
WARNING: Always engage the seat support rod when lifting the seat for any reason. Failure to do so
could result in personal injury and/or product damage.
WARNING: No personal propery, pets, or valuables should be stored in any storage compartment
and left unattended.
NOTE: Prior to latching, ensure that the keys are not in the storage compartment.
NOTE: Ensure the seat is properly latched again before operating.
Figure 6. Seat Support Rod
