Baja
™
BA300
15
I I I . B AT T E R I E S A N D C H A R G I N G
Follow these easy steps to charge the batteries:
1
2
4
5
6
8-14H
3
Figure 9. Battery Charging Procedures Diagram
WARNING! The LED lights on the charger indicate different charger conditions at various times. If
the LED does not indicate that charging is complete within 24 hours, unplug the charger from the
outlet and contact your dealer. Refer to the operating instructions supplied with the charger for a
complete explanation of these indicators.
NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the
battery condition meter will not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your scooter’s battery voltage is low, the charger works harder, sending more electrical current
to the batteries to bring up their charge. As the batteries approach a full charge, the charger sends
less and less electrical current. When the batteries are fully charged, the current sent from the charger
is at nearly zero amperage. Therefore, when the charger is plugged in, it maintains the charge on
your scooter’s batteries, but does not overcharge them. Refer to the manual supplied with the battery
charger for charging instructions.
Can I use a different charger?
Chargers are selected precisely for particular applications and are especially matched to the type,
size, and chemical formulation of specific batteries. For the safest and most efficient charging of your
scooter’s batteries, we recommend use of the charger supplied as original equipment with your product
only. Any charging method resulting in batteries being charged individually is especially prohibited.
What if my scooter’s batteries will not charge?
Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.
Ensure both ends of the charger power cord are inserted fully.
Ensure the circuit breaker is not tripped.
