background image

Spa Delivery Checklist

Optional equipment delivered:______________________________________________
________________________________________________________________________
________________________________________________________________________
____ Function use and care of above optional equipment  reviewed

The above spa was received in good order and the above checklist items were completed 
and understood this date by the undersigned.

______________________________

____________________________________

Spa Purchaser

    Date

Spa Dealer                                           Date

Operational Instruction / Demo 

_____ Chemical Kit & Water Testing 

_____ Spa Drain and Function
 
_____ Warranty Information 
  

_____ Filter Start Time and Duration 

_____ Time of Day Programming

 _____ Economy Programming & Effects

_____ Consumer Lifestyle Programming

_____ Equipment Function (Light)

_____ Filter 

 

Maintenance & Air Relief  

Owners Manuals/ Warranties  

____ Spa Owners Manual 

____ Spa Owners Operational Video

____ Owners Manual Reviewed w/ Owner  

Spa Condition

Headrest (Condition & Care) 
_________________________
_________________________

Spa Cover (Condition & Care)
_________________________
_________________________

Skirting (Condition & Care)
_________________________
_________________________

Overall Spa Appearance: 
_________________________
_________________________
_________________________ 

Other

_______________________

____________________________
____________________________
____________________________
____________________________
____________________________

Dealer Name______________________________________________________________

Purchaser Information

Name  ___________________________________________________________
Address _________________________________________________________
                _________________________________________________________

Phone   (______)__________________________________

Spa Information

Model______________________     Serial#________________________

Color_______________________     Equipment serial#______________________

Date of Installation_____________________  Type:  w/skirt     w/o skirt (circle one)

 Color:  Redwood    Grey  (circle one) 

Voltage potential on delivery ____________    Voltage drop_______________

20

Summary of Contents for sportub series





















Reviews: