background image

16

CHECKING & CLEANING THE AIR FILTER

1.  Locate Air Filter Box  at rear of engine 

2.    Remove air filter  cover by unscrewing phillips head screw

3.    Remove foam Air filter element.

4.    Tap Air filter element gently to remove most of the dust and dirt. 

5.    Wash foam element per instructions below then allow to dry thoroughly.

6.    Reinstall foam air filter element.

7.    Reinstall air filter cover

CAUTION
The air filter element must be intact or the engine will suck in dust and 

dirt, resulting in a shorter service life of the engine.

Water should be prevented from entering into the filter when washing 

the vehicle.

The filter element shall be cleaned gently without twisting to prevent 

it from cracking.  Never wash it with gasoline or any acid, alkaline or 

organic volatile oil to avoid its aging, which will result in reducing the 

effect of the air filter oil to catch particles before they enter the engine.  

Replace the filter element with a new one if it is broken or cracked.

Air Filter box

Rinse with fresh water then 

squeeze out excess.

Wash with mild soap 

and water

Foam Air filter 

element

Phillips head 

screw

INSPECTION AND MAINTENANCE

Summary of Contents for DB30 Mini Bike


































Reviews: