16
General Maintenance Information
Drive Chain Slackness
•
Chain top edge to be kept between the two marks
during chain slackness adjustment.
•
Care should be taken, that the chain should never
run dry.
•
Lubricate chain from outside with SAE 90 oil at
every 500 kms.
•
Chain slackness will have to be adjusted whenever
required.
Wheel Puncture :
Use the recommended levers while removing the Tyre /
Tube for puncture work. This will avoid any damages to
the edges / scratches on paint of the wheel.
Tyre Pressure :
Keep appropriate tyre pressure as mentioned below to
increase life of the tyre & for better fuel consumption.
2
Front
1.75 Kg/Cm (25.0 psi)
2
Rear (Solo)
2.00 Kg/Cm (28.5 psi)
2
Rear (with Pillion)
2.25 Kg/Cm (32.0 psi)
Downloaded from
www.Manualslib.com
manuals search engine