BAK Thermoplastic Welding Technology AG
6
CONTROLLER ADJUSTMENT
Select on the potentiometer (6) the desired welding speed.
Switch driving speed (5):
In position ON the drive motor starts immediately and keeps running.
In position AUTO the drive motor only starts if at least one nozzle is in welding position and
stops after the nozzle has been slide out.
After finishing the welding slide out hot air tools and let them cool down.
To separate the automatic welding machine from the electric system, turn the main switch
to position „OFF“ and unplug the mains plug.
MAINTENANCE
Clean the nozzles with a wire brush (5201330) at the end of a working day.
Clean the drive/pressure rollers with a wire brush.
As required, treat the chain with a suitable spray.
After use, always check that the mains cable and plug are not damaged.
Actual temperature
Upward button
Downward button
Temperature unit
Set temperature
