4
BA RoofOn V30 R16 12_2012 GB mit CE BAK.doc
SAFETY SYMBOLS AND STANDARDS
Existing risks are pointed out with the following warning symbols:
Risk of crushing
Risk of burns
The operator is responsible for the compliance with safety related standards.
Before the machine is commissioned, the operating personnel must be instructed with respect to these
standards.
OPERATIONAL SAFETY
The welding machine is manufactured in accordance with the recognised rules of technology.
The latest safety standards have been observed to eliminate work related risks to the life and health of the
operating personnel when the machine is used in accordance with its intended use.
DANGER ZONE
The main danger zone of the welding machine is the nozzle which can heat up to temperatures of 650 °C. It
is recommended to wear heat protective gloves.
There is a risk of crushing when swivelling the nozzle.
OVERLAP WELDING MACHINE BASIC ADJUSTMENT
Basic adjustment:
Perform adjustments only in cold condition (Danger of burns!).
Nozzle adjustment:
•
Loosen the screws on the device frame in order to change the configuration of the nozzle.
•
Please refer to the following images for recommended adjustments:
38-42mm
Space between outer
edge of nozzle and
pressure roller:
approx. 2,0mm
!!! Danger of burns in the working area !!!