Bakcou Mule, Assembly

REQUIRED TOOLS:

We recommend using medium grade Loctite on any bolts 

that seem to loosen while riding

Cutting Pliers (to cut box poly strapping and  

heavy bike banding)

Scissors (to remove bubble wrap)

Allen wrenches (4mm, 5mm, 6mm included in box)

Wrenches (10mm, 15mm included in box)

Approximate Assembly Time: 20 - 30 minutes

Bakcou Mule Assembly

Make certain to pay attention to all bold italicized text

UNBOXING

1. Cut banding straps from exterior of box and open box.

2. Remove “Tool Kit” box containing pedals, headlight, battery 

charger, and hardware from box.

3. Remove bike from box. (If necessary, lay box on side and 

slide out, or use two people to lift out)

4. Cut banding straps to release the front tire from the frame of the 

bike. (Use caution in cutting banding straps, paying particular 

attention to brake, derailleur, and all other cables on bike)

5. Cut banding straps to remove front and rear fenders from the 

front tire. (Rear fender may already be assembled on bike)

6. Cut banding straps to release handle bars from the frame of the 

bike. (Avoid letting handlebars hang for extended periods and 

thus putting stress on cables. Make certain cable connections 

have not pulled apart during this step, or in shipping)

7. Remove remaining bubble wrap, foam, and shipping 

materials needed to protect the bike during assembly. Note: 

Make certain to remove plastic (if present) from both sides 

of the motor to allow for ventilation while operating.

BAKCOU.COM