OPERATION
WARNING:
MOVING BEATER IN BOWL. KEEP HAND, CLOTHING, AND UTENSILS OUT
WHILE IN OPERATION.
All models are furnished with an ON-OFF switch (figure 1-11), which controls power to the
mixer.
The GEAR SHIFT LEVER (figure 1-3) is used to change
speeds. Always stop the mixer before changing speeds.
To change speeds, turn the switch OFF, move the gear
shift lever to the desired speed, and turn the switch back
ON.
•
Speed 1 (low) - This speed is for heavy mixtures such
as bread dough, heavy batters, and potatoes.
•
Speed 2 (medium) - This speed is for light dough
which must raise quickly, heavy batters, and some
whipping operations.
•
Speed 3 (high) - This speed is fast speed for light
work such as whipping cream, beating eggs, and
mixing thin batters.
AGITATOR
To install an agitator (figure 1-5), the bowl (Figure 1-6) must be installed and fully lowered.
Place the agitator in the bowl, push it up on the agitator shaft, and turn it clockwise to seat the
shaft pin in the slot of the agitator shank.
