Masoneilan SVI3 Installation and Maintenance Manual
=
| 53
© 2021 Baker Hughes Company. All rights reserved.
seconds to cancel calibration and return to the main screen. This button also has
additional Back functionality. This takes you back to the top menu.
•
,
permits you to select or accept the value or parameter option currently
displayed.
Figure 29 SVI3 Display
To determine how to display and select a specific parameter value or configuration option,
refer to the menu structure diagrams shown in Figure 31 on page 56 through Figure 32 on
page 58. When using these diagrams as a map you can move through the menus to the
function you needed.
4.3.2 NAMUR Status
The SVI3 uses the industry standard NAMUR (NE 107) status signal. These signals are
displayed both on the local display and within ValVue 3. All potential faults are defined in
5.2.2 Device Status Diagnostics on page 85. Each fault is defined as one of the following:
NOTE : An exclamation point (!) in the SVI3 display window indicates that there is
instrument status available
.
NOTE : If the pushbuttons are pushed after being locked by SVI3 DTM, the message
LOCKED appears. Refer to the SVI3 DTM Manual for instruction about
unlocking the pushbuttons.
* (Select)
(Smart Cal
/Back
-
(Back)
+
(Forward)
