© 2021 Baker Hughes Company. All rights reserved.
Masoneilan SVI3 Quick Start Guide | 15
Local Commissioning with Pushbuttons and
Local Display
The pushbuttons perform the following functions:
Allows the user to go to the next item in the menu or to increase the value
currently shown in the digital display. Press and hold this button continuously,
the displayed value increases at faster rate.
Allows the user to go to the previous item in the menu or decrease the value
currently shown in the digital display. Press and hold this button continuously,
the displayed value decreases at faster rate.
Launch the Smart Cal routine by following the process detailed below. This
button is intended to be a cancel/back button first, followed by the smart cal
trigger.
To execute the SMART CAL sequence, set ATO/ATC in the positioner and follow the on the
screen instructions to calibrate stops and tune valve. Refer to Figure 18.
Allows the user to accept the value or parameter option currently displayed.
Figure 18 - SVI3 SMART CAL Operations
1.
Press and hold
SMART CAL
button
3. Confirmation
for Calibration
2. Release the
button for
Calibration
4.
Calibration in
progress
