5. The temperature control knob can also be pressed to save the
selection and skip to next setting.
6. If the soldering enters sleep mode, the auto power OFF function is
now enabled as confirmed by blinking "- - -" on the screen and then
the set timer begins.
7. To wake up the soldering station, turn the power OFF and then
back ON.
Setting Temperature Compensation
Note: This function helps correct temperature deviations caused by
environmental changes or the replacement of the heating element,
soldering tip, or other parts.
1. Press the temperature control knob four times to access the
temperature compensation function.
2. Rotate the temperature control knob to set the temperature
calibration range between -58 to 122°F (-50 to 50°C).
3. Upon selection, the digits will blink 7 times and automatically save
the selection and returns to normal operation.
4. The temperature control knob can also be pressed to save the
selection and skip to next setting.
Applications
• Easy professional
soldering jobs
• Indoor lighting
• Electrical
• Education
• Crafts
• Small applicance
• Repair
• Electronic kits
• PCBs
• Low-voltage wiring
• Cable assembly
• Hobby models
• Radio-controlled
• Audio systems
www.
.com
information@itm.com
1.800.561.8187
