29
Absolute SETS (ABS):
Now that two sides have been cut, rotate the log
accordingly for cutting the third face. Make sure the
desired SET thickness is selected and then choose the
appropriate CORE size. ABS should appear in the
LCD display. Press the toggle switch to the SET
position. If the saw head moves up, select SET again
until the saw is positioned to cut the first full slab. As
boards are cut and the saw head is brought back, select
SET again to position the head for cutting the next
board. Repeat this procedure until the desired
CORE
size is reached. Once the desired CORE size has been
reached, rotate the log to the fourth and final face and
choose the last CORE size to activate
ABS
once more
for sizing the last side. Make sure that
Ref
disappears
from the display so that the saw will re-reference to
the new starting height on the last face of the CORE.
Figure E
Figure F
