Bugbox Plus
UM-17 R4.0
Page 31 of 47
Bugbox Plus User Manual
Internal power socket
An internal power socket can be provided within the workstation chamber. The socket is located on
the left hand side, underneath the rear shelf.
The maximum permissible power rating of equipment connected to the internal socket is shown in
Figure 22.
Figure 22: Internal socket power ratings
Supply voltage
Power rating
120V AC, 60Hz
85W
240V AC, 50 Hz
190W
Cable gland
The cable gland is used to allow cables to enter the workstation chamber without affecting the internal
environment of the workstation chamber. The cable gland is suitable for cables of diameter 3.5mm to
7mm. The cable gland port is located on the left hand side and is shown below.
Figure 23: Cable gland
To use the cable gland;
Turn the grey collar anti-clockwise (counter-clockwise) to loosen the cable gland.
Remove the red plug.
Push the cable through the cable gland.
Tighten the grey collar by turning clockwise until tight. Do not over tighten the cable gland.
Universal cable gland
The Universal cable gland is used to allow cables to enter the workstation chamber without affecting
the internal environment of the workstation chamber. The Universal cable gland provides a diameter
of 50mm for passing through larger cables and connectors. The Universal cable gland is located on the
rear of the workstation.
Figure 24: Multi port
