Bugbox Plus
UM-17 R4.0
Page 18 of 47
Bugbox Plus User Manual
Temperature controller
Figure 10 shows the temperature controller;
Figure 10: Temperature controller
1.
Not user accessible (For service personnel only)
2.
Not user accessible (For service personnel only)
3.
Number scrolling button. Use to move across digits. Use with buttons 4
& 5 to increase and decrease the temperature.
4.
Decrease temperature (0.1
°
C increments) or humidity.
5.
Increase temperature (0.1
°
C increments) or humidity.
For temperature control, the white value (PV- Process Value) is the actual temperature. The green
value (SV- Set Value) is the required value (the set point). All temperatures are in
o
C.
For ultrasonic humidity control, the white value is the actual relative humidity and the green value the
required relative humidity (the set point). All humidity’s are percentage relative humidity.
Port selector knob controller
Figure 11 shows the port selector knob controller for hand access to the chamber (see section 0);
Figure 11: Port selector knob controller
1
2
3
4
5
