Invivo
2
Plus
UM-14 Version R3.0
Page 53
Invivo
2
Plus User Manual
Common problems and solutions
7.8
Workstation general problems
7.8.1
Figure 42: Common problems and solutions Figure 42 gives a list of common problems and solutions.
Please consult this list as a first reference in the event of a malfunction of your workstation.
Figure 42: Common problems and solutions
Problem
Cause
Solution
The workstation will
not switch on
The workstation is not
plugged in
The mains socket is not
switched on
The mains fuse has blown
The mains plug fuse has
blown (UK users only)
The ELCB has tripped
Plug the workstation into the mains
Switch the mains power on
Contact your local distributor
Replace the mains plug fuse (UK users only).
Reset the ELCB. If the ELCB continues to trip,
contact your local distributor.
The workstation
temperature will not
go above ambient
plus 5
o
C
The heater mat thermal
protection switch has
activated
The heater mat fuse has
blown
Wait for the workstation chamber to cool and
the heater mat thermal protection switch will
reset itself.
Contact your local distributor
The LED indicators
are not illuminated
24V power supply fuse
has blown
Contact your local distributor
Devices plugged into
the internal socket
are not powering up
The power switch on the
device is not switched on
The plug for the device is
not fully inserted into the
socket
The fuse in the device has
blown and/ or the device
has failed
The internal socket fuse
has blown
Turn the power switch on the device on
Check that the plug is correctly inserted into
the socket
Plug the device into another socket. If the
device does not power up, there is a fault
with the device.
Plug another device into the internal socket
to check the operation of the internal socket.
Contact your local distributor
The internal light
does not illuminate
when switched on
The bulb has blown
The fuse has blown
Contact your local distributor to arrange
replacement
The spot light does
not illuminate when
switched on
The bulb has blown
The fuse has blown
Contact your local distributor to arrange
replacement