FLOOR MODEL GAS DECK OVEN OPERATION MANUAL
11
CLEANING AND MAINTENANCE
Troubleshooting Chart
PROBLEM
PROBABLE CAUSE
REMEDY
No Pilot Light
Gas valve feeding oven may be in the closed
position
Turn gas valve on. Relight pilot.
Main Burner(s) do not light
Gas valve feeding oven may be in the closed
position
Turn gas valve on. Relight pilot.
Thermopile may not be positioned in pilot flame.
Ensure that the tip of thermopile is in pilot flame.
Thermopile may be defective
Call local authorized Bakers Pride Service Agent.
Oven too Hot
Thermostat set too high.
Lower the thermostat setting and see if flame
reduces in size. Allow several hours for heat to
regulate.
Thermostat may be defective
Call local authorized Bakers Pride Service Agent.
Bottom of pies are undercooked
If the same area of the deck is used repeatedly,
the deck temperature in that area will be reduced.
Rotate pies to unused areas of the bake deck that
are hotter and will cook the bottoms faster.
Micro slides are open too much.
Close micro-slides (pull out) until desired
combination is reached. This will help decrease
top heat
Bottom of pies burn before
toppings are cooked
Deck temperature too hot - especially during slow
periods.
Reduce thermostat setting by 50° - 75° below
normal bake temperature. When decks cool begin
cooking and immediately increase the thermostat
setting by 50° - 75°.
Micro slides are closed too much
Open micro slides (push-in) to increase top heat.
Oven was left “ON” overnight
Oven must be turned to “Pilot” position overnight.
It should not be left on a high temperature setting.
Exhaust fan too powerful.
Reduce fan speed.
Pies cook Unevenly
Area’s adjacent to oven walls are generally hotter. Rotate pies (180°), once during each bake or keep
to the center of oven.
Oven does not turn On or Off on
time. (Ovens equipped w/auto oven
starter only)
Power cord not plugged in.
Plug unit in.
Electrical outlet fuse/circuit breaker is tripped.
Replace fuse or reset circuit breaker.
Timer incorrectly set.
Reset Timer.
Unit takes too long to reach temp.
Gas volume or gas pressure may be inadequate.
Contact gas supplier.
Call local authorized Bakers Pride Service Agent.
Summary of Contents for Superdeck Y600 Series
Page 21: ...19 NOTES...
Page 43: ...NOTES...
