background image

Safety Precautions – continued

This appliance is not intended for and should never be used as a heater.

This appliance will be hot during and after use. Use insulated oven mitts or gloves 

for

protection from hot surfaces or splatter from cooking liquids.

Do not touch the appliance until it has completely cooled. The black metal 

housing can reach temperatures of 400°F(200°C) +/- during use.

Use only appropriate bake-ware or utensils while baking and cleaning the 

appliance. Do not use plastic, silicone or glass. 

Do not allow food other than Pizza or Bread Dough to contact the stones. Any 

foods that contain fat, oil or butter (meats, items coated with olive oil, cookies, 

biscuits, etc.) should not contact the stones directly. These items should be baked 

in a metal baking pan, on a metal baking sheet or in a cast-iron skillet as the 

stones will absorb the fat, oil and butter which can cause smoking, odors, staining, 

and can impart rancid flavors to items that you bake in the future. 

Stones are fragile and can break if dropped. The appliance becomes extremely 

hot, do not touch the stones or any other part of the appliance while it is in use. 

To clean stones, heat the appliance for 15 minutes after food is cooked and 

scrape off any remaining residue. Do not use any cleaning agents or other liquids 

to clean the stones.

 Do not place gasoline, alcohol, wood products, charcoal or any other 

combustible material (unless BakerStone approved) in the baking chamber.

Remove any appliance cover and place at least 10 feet (3 Meters) from appliance 

before use.

Do not alter or change the gas valve orifices.

This appliance requires regular cleaning of major components and more detailed 

cleaning of burner system after prolonged period of storage. Insects and/or insect 

nests may prevent safe usage and proper performance of the appliance.

Only use the pressure regulator and hose included with this appliance.

Do not alter or install as a built in appliance.

The use of alcohol, prescription, or non-prescription drugs may impair the 

consumer's ability to properly assemble or safely operate the appliance.

2

Master Contract: 219529

Product Guide

Summary of Contents for O-AJLXX-O-000






















Reviews: