7
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site :
E-mail :
2.4 Dissuaded using
Any activity which does not conform with nature and specifications of
the pallet hook with clamp and everything not explicit named in this
manual. In doubt always contact Bakker Hydraulic Products BV.
3
USING THE PALLET HOOK WITH CLAMP
3.1 Connecting the pallet hook PK
Each pallet hook with clamp is standard fitted with a suspension. The
suspension needs to be fitted to the external machine.
3.2 Working and using the pallet hook PK
The
pallet hook is mounted with a clamp to keep the forks with or
without cargo in balance.
➢
By loosening the lock bolts the forks can be adjusted in any width
you want. When you are satisfied with the width you must tighten
the lock bolts.
➢
The upper arm needs to be pulled up carefully, after the lock pin
is removed.
➢
Mount the lock pin and hairspring pin after adjusting the right
height.
Be sure that the forks are fully placed under the cargo!
Take your distance!
4
MAINTENANCE, DISTURBANCE AND REPAIR
4.1 General maintenance demands
In general the following demands apply:
