8
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site :
E-mail :
➢
The pallet hook needs to be kept clean to assure the right
operation.
4.2 Maintenance schedule
- After 20 working hours, check all bolted connections and tighten if
necessary.
In this chapter you will find a schedule which is your guide for the
necessary maintenance for your pallet hook with clamp.
Component
Action
Frequency
Turning points
Check the tolerances
once a week
Forks
Check for damages and cracks once a week
Clamp
Check for damages
once a week
Pins
Check for wear
once a week
Welds
Check for wear end cracks
once a month
Further it is necessary that your pallet hook has an annually check-up
every year and the pallet hook has to be examined yearly.
4.3 Malfunction
The eventually appearing malfunctions can only be mechanical.
5
SPARE PARTS
If there are parts that need to be replaced on the pallet hook with
clamp, at all times use original parts.
6
WAREHOUSING AND TRANSPORT
During periods that the pallet hook with clamp is not used it must be
stored carefully. Necessary is that the pallet hook is placed in a
closed space which is forbidden for unauthorized people. The pallet
hook needs to be carefully placed so no damages can occur.
The pallet hook needs to be transported properly by the owner/user
or a third party, so the pallet hook cannot be damaged.
