7
Hearing Protection: Always wear hearing protection when operating or observing loud machinery.
Extended exposure to this noise without hearing protection can cause permanent hearing damage or
loss.
Remove Adjusting Tools: Tools left on machinery can become dangerous projectiles upon start-up.
Never leave chuck keys, wrenches or any other tools on the machine. Always verify removal before
starting!
Use Correct Tool for the Job: Only ever use the machine for its intended purpose. Do not force it or
use any attachment to complete a job for which it was not designed. Never make any unapproved
modifications - modifying the machine or using it differently that it is intended may result in
malfunction or mechanical failure that can result in personal injury or death!
Awkward Positions: Keep proper footing and balance at all times when operating the machine. Do
not overreach! Avoid awkward hand positions that make workpiece control difficult or increase the
risk of accidental injury.
Children and Bystanders: Keep children and bystanders at a safe distance from the work area. Stop
using the machine if they become a distraction.
Guards and Covers: Guards and covers reduce accidental contact with moving parts and flying
debris. Make sure they are properly installed, undamaged and working correctly before operating the
machine.
Forcing Machinery: Do not force the machine. It will do the job more safely and more efficiently at the
rate for which it was designed.
Never Stand on the Machine: Serious injury may occur if the machine is tipped or if contact is
unintentionally made with the cutting tool.
Stable Machine: Unexpected movement during operation greatly increases the risk of injury loss
of control. Before starting, verify that the machine is stable. If a mobile base is used, ensure this is
locked.
Use Only Recommended Accessories: Consult this owner’s manual or the manufacturer for the
recommended accessories. Using improper accessories will increase the risk of serious injury.
Unattended Operation: To reduce the risk of accidental injury, turn the machine OFF and ensure all
moving parts are completely stopped before walking away. Never leave a machine running while
unattended.
Maintain with Care: Follow all maintenance instructions and lubrication schedules to keep the
machine in good working condition. A machine that is improperly maintained could malfunction,
leading to personal injury or death.
Damaged Parts: Regularly inspect machine for damaged, loose or mis-adjusted parts - or and
condition that could effect safe operation. Immediately repair or replace before operating the
machine. For your own safety , DO NOT operate a machine with damaged parts.
Maintain Power Cords: When disconnecting cord-connected machines from the power supply, hold
and pull the plug and not the cord. Pulling the cord may damage the wires inside. Do not handle the
cord or the plug with wet hands. Avoid cord damage by keeping it away from heated surfaces, high
traffic areas, harsh chemicals and wet or damp locations.
Experiencing Difficulties? If at any time you experience difficulties performing the intended operation,
stop using the machine immediately! Contact our Technical Support on support@sherwoodtools.com.au
