Balance Balance KH 5506, Operating And Safety Instructions Manual

Water content in the body

Newborn babies

80 %

Baby 3 months

70 %

Adult 25 years

60 %

Adult 85 years

50 %

Remote control

This scale is controlled with an infrared remote control which also includes the display of the scale.

You can simply pull the remote control from the scale and operate it manually. 

-  Always hold the remote control over the device so that the transmission lens of the remote control

is above the sensor lens of the device. This is generally the case if you stand in front of/on the 

scale and hold the remote control in your hands.

-  You can also mount the remote control on the wall above the scale, the transmission lens is horizontal.

Entering personal data

Before you can determine your body fat and water contents you will have to store your personal data

(sex, age and size). A total of 10 storage places are available. To enter your personal data proceed as

follows:

1.

Switch on remote control:

Remove the remote control

from the scale. Press the key 

U

to switch on the remote

control. The running display “bALAnCE“ will appear on the

display above the line and the display “---- kg” below the

line.

2.

Select storage place: 

For approximately 2 seconds, press

the key 

i

until the display “1-10” appears on the display

above the line. The current storage place (a number 

between 1 and 10) will flash shortly thereafter. Select the

storage place for your personal data by pressing the keys

“^” or “v”. Press the key 

i

to confirm. 

3.

Select dimensional unit:

The display kg / lb will appear at

the bottom right in the display. Select the unit kg or lb by

pressing the keys “^” or “v”. Press the key 

i

to confirm.

4.

Enter sex:

The symbol for male / female will appear in the

bottom left corner of the display. Enter your sex by 

pressing the keys “^” or “v”. Press the key 

i

to confirm. 

6

RZ_IB_Köfett_LB4  22.09.2003  11:22 Uhr  Seite 6