Balance Balance KH 5506, Operating And Safety Instructions Manual

5.

Enter age:

The display “AGE” will appear on the left in the

display and a figure for the age in the centre below the line.

Enter your age by pressing the keys “^” or “v” and press

the key 

i

to confirm. 

6.

Enter body size:

The body size in centimetres will appear

in the display above the line. Enter your body size by 

pressing the keys “^” or “v” and press the key 

i

to confirm. 

Note:

if you have selected the dimensional unit “lb” the

body size will be shown in inches. 

7. Following the setting of all personal data the storage place

just programmed will flash on the display. You can now

switch off the remote control by pressing the key 

U

or

program additional storage places by pressing the keys

“^” or “v”. If no keys are pressed, the remote control will

switch itself off automatically after 60 seconds. 

Simple weighing

(without simultaneous measurement of body fat and water contents)

Do not remove the remote control if you merely want to weigh yourself. 

1. Gently touch the scale with your foot. The red LED display

lights up. The running display “bALAnCE“ appears above

the line, the display “---- kg” below the line. After 

approximately 2 seconds the green LED will light up 

and “0.0kg” appears below the line. The scale is now 

ready for operation.

2. Step onto the scale and remain still for weighing.

3. When the scale has established the approximate weight,

“H” will be shown on the display. This display stops flashing

as soon as the weight has been established exactly.

4. If you remain on the scale it will switch off after approximately

60 seconds. When you get off the scale, flashing “H“ is

displayed 3 times and the display “0.0kg” returns. The

scale is now ready again for weighing.

7

RZ_IB_Köfett_LB4  22.09.2003  11:22 Uhr  Seite 7