Balance KH 5509, Instructions For Use Manual

13

Th

  is informational material includes av-

erage values for body fat, body water and 
muscle mass percentages according to age 
and gender.

6

  If you remain standing on the scales, the de-

vice will automatically shut off  aft er  sec-
onds. If you step down from the scales, . 
kg will appear again on the display screen 
aft er a few seconds. Th

  e scales are now ready 

for further body weight measurement.

9.3. Comparison of current and 
previous measurements 

You can compare all currently displayed measure-
ments with the most recently measured results.

ô

 Note:

Th

  e comparison display does not function in 

guest mode, because no measurement values 
are stored in this mode.

To compare the current measurement results 
with previous results:

1

  Remain standing on the scales while the 

current measurement results are being 
displayed.

2

  Press the i button once. Th

 e previous 

measurement result will blink on the dis-
play screen for comparison with the cur-
rent result. 

Fig. 2: Current and previous body water 

percentage measurement in comparison

3

  In order to display comparisons of cur-

rent and previous measurement values 
for other measurement areas: Press the 

up or down button briefl y. Each time you 
press one of these buttons, one of the 
measurement areas (body fat percentage, 
muscle mass percentage, body water per-
centage and caloric requirement) are dis-
played. Th

  e current measurement result is 

displayed for each measurement area and 
the previous measurement result blinks 
in the display screen.

9.4. Display previous 
measurement results

To display your most recently measured re-
sults for …

Ú

 weight

Ú

  body fat percentage

Ú

  muscle mass percentage

Ú

  body water percentage

1

  Press the on/off  button to turn on the dis-

play remote control unit. “Balance” and 
“––––” will appear on the display screen.

2

  Press the down button once. - appears 

on the display screen. Subsequently the 
number of one of the memory locations 
for personal data will blink on the screen.

3

  Select the memory location of your own 

personal data by pressing the up or down 
button. Press the i button when the memo-
ry location number corresponding to your 
personal data is displayed on the screen.

4

  Your personal data will appear on the dis-

play screen. Aft er a few seconds …

Ú

  Th

  e body weight appears in the lower 

part of the display screen.

IB KH5509-10 UK.indb   EN13

IB KH5509-10 UK.indb   EN13

09.01.2006   16:12:29 Uhr

09.01.2006   16:12:29 Uhr