15
|
Warning!
Do not place a load of more than kilo-
grams on the scales! Otherwise the scales
could be damaged beyond repair!
7
If you remain standing on the scales, the
device will automatically shut off aft er
seconds. If you step down from the scales,
. kg will appear again on the display
screen aft er a few seconds. Th
e scales are
now ready for further body weight meas-
urement.
If no new measurement is carried out
within seconds, then the scales will
turn off automatically. Th
e display remote
control unit will turn off automatically
aft er seconds if no buttons are pressed.
10. Maintaining the scales
10.1. Replacing the
batteries in the scales
If this symbol appears on the display screen:
Th
e batteries of the scales are almost empty.
In this case, replace all four batteries with new
AA/Mignon type batteries.
Inserting the batteries is described in chapter
..
“Inserting batteries in the scales”
.
10.2. Replacing the batteries of
the display remote control unit
If this symbol appears on the display screen:
Th
e batteries of the display remote control unit
are almost empty. In this case, replace both bat-
teries with new AAA/Micro type batteries.
Inserting the batteries is described in chapter
..
“Inserting batteries in the display remote
control unit”
.
11. Troubleshooting/error
messages
11.1. The scales can not be turned on
If you can not turn on the scales by placing
light pressure on the top:
A
Check to make sure that the batteries have
been properly inserted in the compart-
ment on the bottom of the scales. Make
sure that the batteries are facing the right
direction with regards to polarity (+/–) in
the battery compartment. Th
e right polar-
ity is depicted on the inside of the battery
compartment.
B
Check to see if the batteries in the scales
are empty. A warning symbol will appear
on the display screen before the batter-
ies are completely empty. Th
is is also ex-
plained in chapter .
“Maintenance of the
scales”
. Replace all four batteries with new
AA/Mignon type batteries.
11.2. The display remote control
unit can not be turned on
If you can not turn on the display remote con-
trol unit by press the on/off button:
A
Check to make sure that the batteries have
been properly inserted in the compart-
ment on the back of the display remote
control unit. Make sure that the batteries
are facing the right direction with regards
to polarity (+/–) in the battery compart-
ment. Th
e right polarity is depicted on the
inside of the battery compartment.
IB KH5509-10 UK.indb EN15
IB KH5509-10 UK.indb EN15
09.01.2006 16:12:30 Uhr
09.01.2006 16:12:30 Uhr
Summary of Contents for KH 5509
Page 3: ...IB KH5509 10 UK indb 3 IB KH5509 10 UK indb 3 09 01 2006 16 11 44 Uhr 09 01 2006 16 11 44 Uhr...
Page 5: ...IB KH5509 10 UK indb 5 IB KH5509 10 UK indb 5 09 01 2006 16 12 24 Uhr 09 01 2006 16 12 24 Uhr...
Page 6: ...IB KH5509 10 UK indb 6 IB KH5509 10 UK indb 6 09 01 2006 16 12 24 Uhr 09 01 2006 16 12 24 Uhr...
Page 29: ...Booklet UK indb 32 Booklet UK indb 32 06 01 2006 13 33 15 Uhr 06 01 2006 13 33 15 Uhr...