Balance KH 5509, Instructions For Use Manual

17

C

  Th

  ere is an obstacle between the infrared 

receiver on the display remote control 
unit and the scales. In this case, remove 
the obstacle.

D

  Th

  e display remote control unit is being 

held at an angle which hinders connec-
tion between the infrared receiver and 
the scales. In this case, hold the display 
remote control unit with the infrared re-
ceiver facing the scales.

11.5. Measurement results 
seem unrealistic

If you doubt the correctness of the displayed 
measurement results:

A

  Make sure you are carrying out the meas-

urements correctly:

Ú

  Are you carrying out the measurement 

without clothes on and especially without 
shoes and socks on?

Ú

  Do you have both feet on the scales’ sensors?

Ú

  Are your feet dry and clean?

Ú

  Do you remain still on the scales until the 

measurement results are displayed?

If you have carried out the measure-
ments correctly:

B

  Make sure that the stored personal data is 

correct. If errors were made when making 
the entries, it could result in false results. 
To do this:

1

  Turn the display remote control unit on 

by pressing the on/off  button.

2

  Subsequently press the up or down but-

ton once briefl y. - appears on the dis-
play screen. Subsequently the number of 

one of the memory locations for personal 
data will blink on the screen.

3

  Select the memory location of your own 

personal data by pressing the up or down 
button. Press the i button when the memo-
ry location number corresponding to your 
personal data is displayed on the screen.

4

  Make sure that the displayed data cor-

rectly corresponds to your personal data. 
If the displayed data contains errors, then 
you have to store your personal data again. 
Th

  e process of storing personal data is ex-

plained in chapter . 

“Prior to initial use”

.

If the entered personal data contains no 
errors:

C

  Carry out measurements daily over a pe-

riod of one week. If these measurement 
return similar results: Compare your 
measurement results with the average val-
ues in the tables in the accompanying in-
formational material. Use the average val-
ues to determine whether there are large 
diff erences between these values and 
your own measurement results. If this is 
the case, please consult your physician to 
have the measurement results checked.

11.6. Other malfunctions

Please refer to one of our service partners in 
your area if …

Ú

  the malfunctions described in sections .. 

to .. can not be rectifi ed as described or

Ú

  other malfunctions occur while using the 

scales and/or display remote control unit.

You will fi nd the addresses of our service part-
ners on the warranty card. You will fi nd the 
warranty card with the scales.

IB KH5509-10 UK.indb   EN17

IB KH5509-10 UK.indb   EN17

09.01.2006   16:12:31 Uhr

09.01.2006   16:12:31 Uhr