background image

Five Year Limited Warranty

  

Terms and Conditions 
 
1.  Limited Warranty
 
Upon  receipt  of  the  attached  warranty  registration  form,  Balanced  Audio  Technology  warrants  the  purchased 
product to be free from manufacturing, materials, and workmanship defects for five years from date of original 
purchase,  subject  to  the  following  conditions.    Failure  to  return  the  enclosed  registration  form  within  30 
days from original purchase will result in a warranty period of one year from the date of manufacture. 
 
2.  Limited to Original Purchaser
 
This warranty is for the sole benefit of the original purchaser of the covered product, and may not be transferred 
to a subsequent purchaser of the product. 
 
3.  Conditions and Limitations 
This warranty is subject to certain conditions and limitations, as follows.  This warranty is void and inapplicable 
if the product has not been used in accordance with the instructions found elsewhere in this manual, or if it has 
been  misused  or  abused,  damaged  by  accident  or  neglect,  or  in  transport once in possession of the purchaser.  
The  warranty  is  also  void  if  the  product  has  been  repaired,  modified,  or  tampered  with  by  anyone  other  than 
Balanced Audio Technology or its specifically authorized agents.   
 
4.  Remedy 
If  this  product  contains  a  materials,  manufacturing,  or  workmanship  defect  that  cannot  be  repaired  at  the 
dealership where the product was purchased, it must be packed in original packaging and returned to Balanced 
Audio Technology via insured freight, at the owners expense.  If replacement packaging materials are required, 
they  will  be  supplied  by  the  factory  at  a  nominal  charge.    Returned  products  must  be  accompanied  by  a 
written  description  of  the  defect,  and  a  return  authorization  number  (available  from  the  factory  via 
phone  or  fax).
    Upon  receipt  of  defective  product,  Balanced  Audio  Technology  agrees  to  repair  the  product 
without charge for parts (except vacuum tubes if the unit is more than one year old), or labor.  The product will 
then  be  returned  via  prepaid,  insured  freight,  with  carrier  at  the  sole  determination  of  Balanced  Audio 
Technology. This constitutes the purchasers sole remedy.   

 

5.  Design Changes 
Balanced  Audio  Technology  reserves  the  right  to  modify  its  products  or  change  specifications  at  any  time 
without obligation or liability to previous purchasers. 
 
6.  Miscellaneous 
Any  implied  warranties  relating  to  the  above  product  shall  be  limited  to  the  duration  of  this  warranty.    This 
warranty  does  not  extend  to  any  incidental  or  consequential  costs  or damages to the purchaser. This warranty 
gives you specific legal rights.  You may also have other rights which vary from state to state. 
 

Summary of Contents for VK-6200











Reviews: