[A/B]
This function allows the user to continuously play the selected section of any CD track. The
selected segment is marked by two pointers: A (beginning) and B (the end of segment). To
activate this function do the following:
1. Start the desired track in normal [PLAY] mode.
2. At the beginning of the desired segment, press the [A/B] button. The “A” symbol will
appear on the VK-D5SE display.
3. At the end of the desired segment, press the [A/B] button again. The A-B symbol will
now be displayed by the CD player and the selected segment will now be repeated
continuously until the [STOP] button is pressed.
[TIME]
Pressing the [TIME] button on your VK-R2 remote control transmitter will change the VK-
D5SE time display mode in the following sequence:
1. Elapsed time from the beginning of the current track
2. Total time from the beginning of the CD
3. Remaining time to the end of the CD
Preamplifier Controls
The four buttons in the lower section of the VK-R2 remote transmitter control the volume of
the BAT i-series preamplifiers.
NOTE: The VK-R2 remote transmitter will only control the BAT i-series preamplifiers that are
equipped with the factory remote control option.
The functions of the preamplifier control buttons are identical to those of the similarly marked
buttons on the VK-R1 preamplifier remote control transmitter.
1. Volume Up and Volume Down control
2. Mute function
3. Fade Down/Fade Up function
