Dishwasher
Summary instructions
Brief and handy: everything
your dishwasher needs ...
Before using for the first
time, read the operating
instructions!
Switch off the appliance
Everything o.k ...
9000
294 516
en
Start programme
Here we go ...
Adding rinse aid
Adding detergent
Select programme
Filling the salt dispenser
Switching on the appliance
Adjusting the water softening system *
Quickly sorted ...
Water
hardness
value
_
dH
Hardness
range
mmol/l
Set
value
soft
soft
medium
medium
medium
hard
hard
hard
How to adjust the water softening system
– Switch on ON/OFF switch
– Hold down programme button A and press START button until H:0...
is indicated on the digital display.
– Release both buttons.
The LED for button A flashes and the factory set value of H:04 is
indicated on the digital display
– Press programme button C.
Each time the button is pressed the set value increases by one setting;
when the value reaches H:07, the display jumps back to H:00 (off).
– Press START button. The chosen setting has now been stored.
Ask your water supply
company what the
water hardness is and
enter...
* only before the
first wash or if the
water hardness
has been
changed
A
B
C
Dissolves limescale (not necessary for set value 0 !) ...
Unscrew
cover.
Fill the salt
dispenser with
water before the
first wash only.
Add salt
(never add
detergent!).
Screw on the
cover. Wash
immediately.
Spick and span ...
Refill if rinse-aid refill indicator is lit!
Press mark 1,
lift up cover 2.
Adding
rinse aid.
Screw on
the cover.
CLICK!
A lot of dirt, a lot of detergent ...
If required, open
the cover (press
button).
Attention
Combination
products are not
suitable for all
programmes, follow
manufacturer’s
instructions.
Adding
detergent.
Slide cover
shut, press.
PLOP!
Quick, economical or intensive ...
The max. possible number of programmes is illustrated
in this overview. The corresponding programmes for your
appliance can be found on the fascia.
Overview of programmes
The programme data has been measured in the laboratory
according to European standard EN 50242.
Deviations are possible in practice.
*
half normal load
1:40-2:15
1,30-1,60
–
11-15
2:20
1,05
9
–
1:05-1:20
0,70-0,85
–
10-15
0:29
*
0,80
10
–
0:15
0,05
4
–
1:25-2:30
1,00-1,60
–
9-19
Quick
45
_
Eco
50
_
Auto
45
_
/65
_
Duration: hs/mins
Energy Consumption: kWh
Water consumption in litres
With Aquasensor
Auto
65
_
/75
_
Auto
35
_
/45
_
Prerinse
Additional options **
Flexibility ...
Express Wash
(VarioSpeed)
... is obtained by
increased energy
consumption at a
constant cleaning and
drying performance.
Half load
... for a few items, saves
water, energy and time
** depending on model
IntensiveZone
... perfect for a mixed
load. Washing pressure
and washing
temperature are
increased slightly.
Hygiene
... The temperature is
increased during
the rinsing process. This
increases the hygiene
status.
Extra drying
... improves the drying
result by increased
temperature in the final
rinse (Please take care
with delicate dishes)
