en
9
Filling the rinse-aid
container
The purpose of a rinse-aid is to prevent
the formation of water marks on tableware
and utensils, and to ensure that glasses
are clean and sparkling. The rinse-aid is
consumed during the washing process.
Fold back the lid on the rinse-aid
container
29
.
To open the lid, press the mark (1
) on
the rinse-aid lid and simultaneously lift
the lid off the lug (2
).
1
2
Pour the rinse-aid into the filler hole
until the level indicator turns dark.
Close the lid, ensuring that you hear it
snap closed.
Use only rinse aid for domestic
dishwashers. Spilt rinse aid may result in
excessive foam formation in the next rinse
cycle. Therefore, remove any spilt rinse
aid with a cloth.
Adjusting the amount of
rinse-aid
The amount of rinse-aid added to the
water can be varied by adjusting the
stepless control. The rinse-aid control has
been set to ”4” in the factory.
Do not alter the setting of the rinse-aid
control unless streaks (turn knob towards
”–”) or water marks (turn knob towards ”+”)
are left on the dishes.
29
rinse–aid control
LOW RINSE–AID indicator
As long as the LOW RINSE-AID indicator
on the front panel
6
or on the
dispenser
29
is dark, there is sufficient
rinse-aid in the dishwasher.
LOW RINSE-AID indicator
Summary of Contents for 3VT913NA - annexe 1
Page 1: ...9000 049 088 en...
Page 2: ......
Page 28: ...en 28 en Subjekt to modification...
Page 29: ......
