Start
Filling the salt dispenser
Adding rinse aid
Adding detergent
Select programme
Brief and handy:
everything your dishwasher
needs …
Before using for the first time,
read the Installation instructions
and Operating instructions!
5
4
3
2
6
9
7
Summar
y of instructions
Dishwasher
en
Start programme
Here we go...
Switch off the appliance
Everything o.k....
8
Switching on the appliance
1
9000 533 707
(9001) 640 EA
Ask your water supply
company what the water
hardness is and enter...
Adjusting the water softening system*
Quickly sorted ...
* only before the first
wash or if the water
hardness has been
changed
°Clarke
Hardness
range
mmol/l
Setting
How to adjust
– Switch on ON/OFF switch.
– Press and hold down the START button.
– Release button.
The salt refill indicator
$
flashes and the display
6
is lit (=Setting1).
Change the setting as follows:
– Press START button.
The display
$
goes out. The selected setting is saved.
soft
medium
hard
hard
– Rotate programme selector by one notch to the left or to the right.
– Rotate programme selector until the required setting has been selected.
0-8
9-20
21-26
27-44
0-1.1
1.2-2.9
3.0-3.7
3.8-6.2
0
1
2
3
Read off the correct setting
,
End
6
Dissolves limescale (not necessary for set value 0!) ...
$
Unscrew
cover.
Fill the salt
dispenser with
water before
the first wash only.
Add
special salt
(never add
detergent!).
Screw on
the cover.
Wash
immediately.
Spick and span ...
%
Press
mark 1,
lift up
cover 2.
Fill in
rinse aid
.
Screw on
the cover.
CLICK!
2
1
A lot of dirt, a lot of detergent ...
7
If required,
open the cover
(press button).
Attention:
Combination
products
are not suitable
for all programmes,
follow
manufacturer’s
instructions.
Pour detergent
into the dry
detergent
dispenser only.
Slide cover
shut, press.
PLOP!
15 ml
25 ml
50 ml
Overview of programmes
The max. possible number of programmes
is illustrated in this overview.
The corresponding programmes for your appliance
can be found on the fascia.
The programme data has been measured in the
laboratory according to European standard EN50242.
Deviations are possible in practice.
* half normal load
Quick, economical or intensive ...
Prerinse
Quick
45°
Gentle
40°
Eco
50°
Normal
65°
Intensive
70°
Energy consumption in kWh
Water consumption in litres
Duration: hs : mins
±
Ù
á
é
ñ
ù
à
ð
ø
Ú
²
ê
2:15
2:20
2:20
1:10
0:29 *
0:15
1,65
1,45
1,05
0,85
0,80
0,05
16
15
12
14
11
4
Additional options**
Flexibility…
Express Wash
... is obtained by increased
energy consumption
at a constant cleaning
performance.
Half load
... for a few items,
saves water, energy
and time.
Extra drying
... improves the drying
result by increased
temperature
in the final rinse.
(Please take care
with delicate dishes.)
Hygiene
... the temperature
is increased during
the final rinse process.
This increases
the hygiene status.
Intensive zone
... perfect for
a mixed load.
Washing pressure
and washing temperature
are increased slightly.
** depending on model
Ÿ
§
Ï
·
¿
