background image

Template  56377  10-05-12

59340-91_59342-01_59310_59371_97_C   10-17-19

1

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.                                            © Copyright 2009 Balboa Water Group.

BP200UX Tech Sheet

Customer:   

Balboa Water Group

Part Number:

 

59340-01  3.0kW 800 Incoloy 

 

 

59371 

3.0kW 825 Incoloy 

 

 

59342-01  2.0kW 800 Incoloy 

 

 

59310 

Remote Heater System -- Heater is sold separately

Custom Box Overlay 

  

Box Overlay Part Number  N/A

CE System Model For 2.0KW:  BP2-BP200UX-RCA-2.0KW
CE System Model For 3.0KW:  BP2-BP200UX-RCA-3.0KW
CE System Model For Remote:  BP2-BP200UX-RCA
Software Version ID:   

M100_235 V52.0

Software Version:   

52.0

File Name:   

BP200_52.0_BP200UX.hex

Configuration Signature: 

AE7D76E4

Eng. Project Number:   

5270

Control Panels (See later pages for more information):
spaTouch™2   

Any version (version 2.0 or later required for bba™2 fully integrated functionality)

Icon spaTouch™ 

Any version (version 3.36 or later required for bba™2 fully integrated functionality)

Menued spaTouch™ 

Any version (version 2.8 or later required for bba™2 integrated functionality)

TP800 

 

Version 3.1 and later (Version 3.13 or later required for bba™; version 4.11 or later required for bba™2 integrated functionality)

TP600 

 

Version 2.7 and later (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

TP500 

 

Any version

TP400T CE   

Version 2.7 and later (TP400T US should not be used) (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

TP400W CE   

Version 2.7 and later (TP400W US should not be used) (Version 2.12 or later required for bba™/bba™2 On/Off control via menu)

Summary of Contents for 59310



























Reviews: