Template 56377 10-05-12
59340-91_59342-01_59310_59371_97_C 10-17-19
15
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. © Copyright 2009 Balboa Water Group.
Jumper Definitions
J109
Non Applicable on CE models
J30
Do Not Use
J31
Jumper on 1 pin with 2.0kW or smaller heater
Jumper on 2 pins with a 3.0kW or higher heater
J44
Jumper must be on center two pins (240V) for CE Systems.
Warning!
Setting DIP switches or jumpers incorrectly may cause abnormal system behavior and/or damage to system components.
Refer to Switchbank illustration on Wiring Configuration page for correct settings for this system.
Contact Balboa if you require additional configuration pages added to this tech sheet.
J109
120V
120V
240V
J44
J31
for 3kW models
J31
for 2kW models
Jumper setting varies by system model
which is shown to the right of the jumper.
