22
23
SETTING VOLUME LOCK
The Dolphin can be set so that the volume control
buttons will always control the same device no
matter which device mode is selected.
If your TV is not remote controllable, or if you
would like the volume to be controlled by a
different component, you can change the Volume
,OCKSETTINGTOCONTROLVOLUMETHROUGHA
non-associated mode (e.g., through the cable in
the TV mode).
To Change Volume Lock to CBL/SAT mode:
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
%NTERANDTHENPRESS#",3!4ONCE
4HE,%$WILLBLINKTWICE
3. Now ,whenever you press , Volume
–, or MUTE on the Dolphin, volume will be
CONTROLLEDBYYOUR#ABLE#ONVERTEROR3ATELLITE
To Change Volume Lock to TV mode:
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
2. Enter 9 - 9 - 3 and then press TV once. The
,%$WILLBLINKTWICE
3. Now, whenever you press , Volume
–, or MUTE on the Dolphin, volume will be
controlled by your TV.
To Change Volume Lock to VCR mode:
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
2. Enter 9 - 9 - 3 and then press VCR once. The
,%$WILLBLINKTWICE
3. Now, whenever you press , Volume
–, or MUTE on the Dolphin, volume will be
controlled by your VCR.
To Change Volume Lock to DVD mode:
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
2. Enter 9 - 9 - 3 and then press DVD once. The
,%$WILLBLINKTWICE
3. Now, whenever you press , Volume
–, or MUTE on the Dolphin, volume will be
controlled by your DVD Player.
To Change Volume Lock to CD mode:
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
2. Enter 9 - 9 - 3 and then press CD once. The
,%$WILLBLINKTWICE
3. Now, whenever you press , Volume
–, or MUTE on the Dolphin, volume will be
controlled by your CD Player.
To Change Volume Lock to RCVR mode:
NOTE: Performing these steps will allow you to
access the volume control of your audio component
in all modes.
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
2. Enter 9 - 9 - 3 and then press RCVR once. The
,%$WILLBLINKTWICE
3. Now, whenever you press , Volume
–, or MUTE on the Dolphin, volume will be
controlled by your audio component.
Clearing Volume Lock
The volume lock can be cleared so that the volume
control buttons will control whatever device
is selected.
To clear the volume lock:
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
2. Enter 9 - 9 - 3 and then press Volume Up. The
,%$WILLBLINKTIMESWHENUNLOCKED
Clearing Volume Lock for One Device
The volume lock can be cleared for one specific
device so that the volume control buttons will
control that device when it is selected.
To clear the volume lock for a specific device:
1. Press the device key for the unit to
be unlocked.
/NTHE$OLPHINPRESSANDHOLD3%450UNTILTHE
,%$BLINKSTWICETHENRELEASE3%450
3. Enter 9 - 9 - 3 and then press Volume Down.
4HE,%$WILLBLINKTIMESWHENUNLOCKED
