The system data label is located on the control box. This label is very important and
contains information you will need to establish your electrical service. The voltage and
amperage ratings are shown on the bottom of the label. Product, Model, Serial and Code
numbers are also shown on the label. Please take a moment and fill in your information
for future reference.
To all original purchasers, HydroQuip, warrants this product to be free from
defects in material and workmanship for a period of 1 year from the date of
manufacture.
Hydro-Quip will, at it’s discretion, repair or replace any part which has been
found to be defective.
This warranty excludes damage as a result of: normal wear, freezing, low
voltage, chemical abuse, accident, negligence, alteration, improper installation,
use or care.
To obtain warranty service, return defective products within the warranty period
to Hydro-Quip.
The Hydro-Quip Limited Warranty is for service on the control box only.
Purchaser is responsible for removal or reinstallation labor, freight charges, or
any other such costs incurred in obtaining warranty service.
Hydro-Quip assumes no responsibility for incidental or consequential damages.
Some states do not allow the exclusion of incidental or consequential damages,
so the above limitations and exclusions may not apply to you. This warranty
gives you specific legal rights and you may also have other rights, which vary
from state to state.
If you are the end user for this control system, the spa dealer may provide a
different warranty; contact your spa dealer for details and warranty information.
System Data Label
Warranty Information
Note:
This information will be necessary if you should ever have to request
warranty or any other type of service.
22
SpaDepot.com
