11
44 800 496 9698
customercare@balcolifestyle.com
Model Number
HE180433
After Sales Support
Setup & Operation
Charging the batteries
1.
Connect the camera to a computer or use a standard 5V 0.5A wall adaptor using the supplied USB
charging cable
2.
The LED beside the screen will turn red. When the battery is fully charged the LED light will turn off
completely
NOTE: The cameras take around 4 hours to fully charge
Inserting a microSD card
The Action Camera does not have any internal memory. A microSD card (not included) must be inserted
for the Action Camera to record footage and capture images
1.
While the Action Camera is off, insert a microSD card into the port on the side of the Action Camera
until you hear a small click. When fully inserted into the Action Camera, you will feel a small click.
Your Action Camera is now ready to record and capture images
2.
To remove the microSD card, turn off the camera then push the card in slightly until you hear a click,
the card will then pop out from the Action Camera for removal
NOTE:
• Ensure that the microSD card you have inserted has a maximum capacity no more than 128GB and is
at least Class 10
• CAUTION: If you are installing a previously used memory card into the camera, make sure to back up
any data stored on the card, to avoid possible data loss
