background image

WARRANTY

All Balcrank

®

 equipment sold by authorized Balcrank

®

 distributors is warranted to their original customer to be free 

from defects in materials and workmanship for a period of one year from the date the equipment was sold to the 

original  customer.  Select  equipment  carries  extended  warranty  terms  as  individually  noted  within  the  Balcrank

® 

Lubrication Equipment & Accessories User Price List. Any Balcrank

®

 equipment carrying an extended warranty will 

be warranted for the period indicated; those items carrying a “lifetime” warranty are warranted for a period of thirty 

years. All  Balcrank

®

  equipment  determined  by  Balcrank

®

  to  have  defective  materials  or  workmanship  within  the 

one year warranty period will be repaired or replaced. For equipment carrying extended warranties Balcrank

®

will 

repair  or  replace  the  product  including  parts  and  labor  for  the  first  full  year  and  will  provide  parts  only  for  the 

remaining period of the specified warranty.

This warranty only covers equipment installed and operated according to applicable Balcrank

®

 Service Bulletins and 

Installation Instructions. Any equipment claimed to be defective must be returned, freight prepaid, to an Authorized 

Balcrank

®

 Service Center. If the part(s) or equipment is found to be defective, it will be repaired or replaced, and 

returned freight prepaid from the Authorized Service Center. If the claimed part(s) or equipment is found not to be 

defective, the Authorized Balcrank

®

 Service Center will, upon written authorization being received from the original 

customer, repair them for a reasonable charge to the customer which will include all applicable parts, labor, and 

return transportation costs. Any equipment returned to Balcrank

®

 must have the Warranty Service Claim number 

(WSC#) clearly marked on the outside of the carton. Balcrank’s sole responsibility is for defects in material and 

workmanship,  and  Buyer’s  sole  and  exclusive  remedy  hereunder,  shall  be  limited  to  repair  or  replacement  of 

the defective part or equipment.
This  warranty  does  not  cover,  nor  shall  Balcrank

®

  be  liable  for  repair  or  replacement  of  parts  or  equipment 

resulting  from  general  wear  and  tear  through  use,  or  damage  or  failure  caused  by  improper  installation,  abuse, 

misapplication,  abrasion,  corrosion,  insufficient  or  improper  maintenance,  negligence,  accident,  alteration,  or 

substitution of non-Balcrank component parts. Furthermore the Balcrank

®

 Warranty for Lubrication Equipment and 

Accessories does not cover the following specific conditions:

  Failure or damage to equipment that is caused by dirt or debris in air and fluid lines. This includes, but is not 

  limited to clogged inlet filters, strainers, or regulators; fluid meters; control handles; fluid tips; and valves.

  Failure of normal wear parts including but not limited to: “o”-rings, packings, seals and valves unless originally 

  improperly installed by the factory.  

  Products placed in applications for which their use was not intended. Examples include but are not limited to: A 

  lubricant pump being used to pump solvents, or placing a piece of equipment intended strictly for indoor use in 

  an outdoor application.

 

Damage to equipment resulting from operation above and beyond Balcrank’s recommendations.

  Leaks at air and fluid fittings and connections.

  Damage caused by thermal expansion when adequate pressure relief was not included in the system.

  Loose suction tubes on pumps.

  Reel spring tension adjustment.

THERE  ARE  NO  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED,  INCLUDING  WARRANTIES  OF  MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL BALCRANK BE LIABLE 

FOR ANY SPECIAL, CONSEQUENTIAL, OR OTHER DAMAGES OF SIMILAR NATURE, INCLUDING BUT NOT 

LIMITED TO LOST PROFITS, LOST PRODUCTION, PROPERTY DAMAGE, PERSONAL INJURY, WHETHER 

SUFFERED BY BUYER OR ANY THIRD PARTY, IRRESPECTIVE OF WHETHER CLAIMS OR ACTIONS, LEGAL 

OR  EQUITABLE,  FOR  SUCH  DAMAGES  ARE  BASED  UPON  CONTRACTS,  WARRANTY,  NEGLIGENCE, 

STRICT  LIABILITY,  OR  OTHERWISE.  ANY  CLAIM  OR  ACTION  FOR  BREACH  OF  WARRANTY  MUST  BE 

BROUGHT WITHIN TWO (2) YEARS FROM THE DATE OF SALE TO THE ORIGINAL CUSTOMER.

Balcrank

®

 Corporation

Weaverville, NC   28787

800-747-5300

800-763-0840 Fax

www.balcrank.com

Distributed by:

SERVICE BULLETIN SB1045

Rev. A  6/03

831223

PRODUCT EXTENDED WARRANTY

Bobcat

 130 Series Pumps are warranted to be free from defects in material and workmanship for a period of 

five years from date installed in service by the original purchaser. Normal wear of items such as packings or 

valve seats are not considered to be defects in material or workmanship.

Summary of Contents for BOBCAT 130 Series













Reviews: