background image

Balcrank

®

 Corporation

Weaverville, NC   28787

800-747-5300

800-763-0840 Fax

www.balcrank.com

Distributed by:

SERVICE BULLETIN SB3059

Rev A  12/08

832438

Balcrank Lubrication Equipment Warranty Statement

All Balcrank equipment sold by authorized Balcrank distributors is warranted to their original customer to be free from defects in materials and workmanship 

for a period of one year from the date of sale to that customer. Selected Balcrank equipment carries warranty terms for a more extended period as defined in 

the Balcrank Lubrication Equipment & Accessories User Price List, wherein a “lifetime” warranty represents a warranty period of thirty years. Within the initial 

one-year warranty period, Balcrank will repair or replace all Balcrank equipment determined by Balcrank to have defective materials or workmanship. For 

equipment carrying more extended warranties, Balcrank will repair or replace the product including parts and labor during the first full year and will provide 

parts only for the remainder of the warranty period.

This warranty applies only to equipment installed and operated according to applicable Balcrank Service Bulletins and Installation Instructions.

Any equipment claimed to be defective must be returned, freight prepaid, to an Authorized Balcrank Service Center (ASC). Upon receiving candidate warranty 

equipment from a customer, ASC will: 1) diagnose to determine the warrantable condition of the equipment, 2) submit, prior to repair or replacement, a 

request to Balcrank for warranty authorization, then 3) in cooperation with Balcrank, proceed with repair locally or forward the equipment to Balcrank and 

obtain replacement. If the part(s) or equipment items are found defective upon inspection by Balcrank, they will be repaired or replaced, and then will be 

returned to the ASC. If Balcrank finds the claimed part(s) or equipment not to be defective, the ASC will receive written authorization from the original 

customer, and then repair them for a reasonable charge to the customer, which will include all applicable parts, labor, and return transportation costs.

Optionally, the customer may submit certain eligible products directly to Balcrank for warranty return by using Balcrank Lubrication Equipment Direct Service 

Warranty Procedure. Eligible products are defined in the Balcrank Lubrication Equipment & Accessories User Price List. Refer to the Balcrank web site www.

balcrank.com for a copy. 

Any equipment returned to Balcrank must have the Warranty Service Claim number (WSC#) clearly marked on the outside of the carton. Balcrank’s sole 

responsibility is for defects in material and workmanship, and Buyer’s sole and exclusive remedy hereunder, shall be limited to repair or replacement of the 

defective part or equipment.

This warranty does not cover, nor shall Balcrank be liable for repair or replacement of parts or equipment resulting from general wear and tear through use, 

or damage or failure caused by improper installation, abuse, misapplication, abrasion, corrosion, insufficient or improper maintenance, negligence, accident, 

alteration, or substitution of non-Balcrank parts.

Furthermore, the Warranty for Lubrication Equipment and Accessories does not cover the following specific conditions:

•  Failure or damage to equipment caused by dirt or debris in compressed air lines and fluid lines. This includes, but is not limited to, clogged inlet filters, 

strainers, or regulators; fluid meters; control handles; fluid tips; and valves.

•  Failure of normal wear parts including but not limited to: o-rings, packings, seals and valves unless originally improperly installed by the factory.  

•  Products placed in applications for which their use was not intended. Examples include but are not limited to Lubricant pump being used    

 

to pump solvents, or placing equipment intended strictly for indoor use outdoors 

•  Damage to equipment resulting from operation above and beyond Balcrank’s recommendations.

•  Leaks at air and fluid fittings and connections.

•  Damage caused by thermal expansion whenever adequate pressure relief was not included in the system.

•  Loose suction tubes on pumps.

•  Incorrect hose reel spring tension, requiring adjustment.

THERE  ARE  NO  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED,  INCLUDING  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A 

PARTICULAR PURPOSE. IN NO EVENT SHALL BALCRANK BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, OR OTHER DAMAGES OF SIMILAR 

NATURE, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST PRODUCTION, PROPERTY DAMAGE, PERSONAL INJURY, WHETHER SUFFERED 

BY BUYER OR ANY THIRD PARTY, IRRESPECTIVE OF WHETHER CLAIMS OR ACTIONS, LEGAL OR EQUITABLE, FOR SUCH DAMAGES ARE BASED 

UPON CONTRACTS, WARRANTY, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE. ANY CLAIM OR ACTION FOR BREACH OF WARRANTY MUST 

BE BROUGHT WITHIN TWO (2) YEARS FROM THE DATE OF SALE TO THE ORIGINAL CUSTOMER.

Revision Log:
New Release - 12/07

Rev. A - Updated warranty statement

Summary of Contents for FUSION 3110-013













Reviews: