8
Operation - Dispense Order Process
The Dispense Keypad is used by the operator to select a dispense order. The Dispense
Keypad verifies the User Pin Id before access to a pending Work Order is allowed.
Enter Pin No. Screen
To dispense fluid, the operator enters his/her 4-digit Pin No.
Press the Enter key to continue.
NOTE:
The system validates the Pin No. to allow only autho
rized users to access the system.
The Enter Pin No. screen clears if the Pin Number that is entered is not valid.
Enter WO No. Screen
Enter the desired Work Order number.
Press the Enter key to continue.
NOTE:
To get an alpha on screen, press and hold the letter
key until it appears (approximately three (3) seconds).
The PC/Host computer validates the Work Order number.
