1. After power on ,the indoor temperature will display automatically, it
will update reading each 30 seconds and start to receive outdoor
signal which lasts for max 3 minutes.
2. Indoor temperature display range:-10
℃
~ 50.0
℃
(14
℉
~ 122
℉
); for
temperature lower than -10
℃
,the reading will be :“LL.L”; for
temperature higher than +50
℃
,the reading will be :“HH.H”.
3. Outdoor temperature display range :-40
℃
~60
℃
(-40
℉
~140
℉
); for
temperature lower than -40
℃
,the reading will be :“LL.L”; for
temperature higher than +60
℃
,the reading will be :“HH.H”.
4. Arrow indication for temperature changes:
will display when temperature changes less than 1
℃
within one
hour or compared with last reading;
will display when the reading increase by 1
℃
within one hour or
compared with last reading.
will display when the reading decrease by 1
℃
within one hour or
compared with last reading.
5. Accuracy: ±1
℃
. Temperature resolution is 0.1
℃
(0.1
℉
).
6. Press “SET ” button to switch from Celsius degree to Fahrenheit
degree.
TEMPERATURE
1. After power on ,the indoor humidity will display automatically, it will
update reading each 30 seconds and start to receive outdoor signal
which lasts for max 3 minutes.
2. Humidity display range: 1%-99%;for humidity lower than 1%, the
HUMIDITY
4. Press and hold “MEM” button will clear the max and min record
and reactivate the memory.
5. During setting, if no operation for 5 seconds, it will automatically
save and exit setting.
6. Normally, the Max and Min record will update every 24 hours at
0:00.
11
EN
Summary of Contents for B0359WST2H2PR-V1
Page 91: ...www baldr com service baldr com...
Page 92: ......
