Do not clean any part of the product with benzene, thinner or other
solvent chemicals. When necessary, clean with a soft cloth.
Never immerse the product in water. This will damage the product.
Do not subject the product to extreme force, shock, or fluctuations
in temperature or humidity.
PRECAUTIONS
If your BALDR product does not operate properly after trying the
troubleshooting steps, contact the seller on your order page or
shoot an email to: service@baldr.com.
18
Problem
No outdoor
sensor reception
Possible Solution
Inaccurate
temperature/
humidity
feet (0.9 m) away from electronics that may
interfere with
the wireless communication (such as TVs,
heavy duty or rechargeable batteries.
NOTE: It may take a few minutes for main
unit andsensor to synchronizeafter batteries
are reloaded.
Make sure both the main unit and sensor are
placed out of direct sunlight and away from
any heat sources or vents.
“HH/LL” display in
indoor and/or
outdoor
temperature
If the temperature is higher than the detection
range, HH will display on screen for indication;
if lower than the detection range, LL will
display on screen for indication.
Make sure both units are placed at least 3
Use standard alkaline batteries . Do not use
EN
