- 5 -
Issue 2
Remove these two screws
from the late on each side
To remove the base, remove
the 2 lower screws from both
Carefully lift the top, including
the base.
the side panels, away from
the left and right hand sides.
Cable removal from Base
Remove nut from gland.
Pull gland forward and
slide cable through slot.
L
I
F
T
DO NOT remove
these two screws.
Ensure that the supply
is disconnected.
Figure 4. To remove the base
95
.0
0m
m
115.00mm
Dia. 4.00mm
4mm Fixings
BASE
Figure 5. Wall Mounting Dimensions