4
Issue 1 Software iss BVAM8-7
To Broadcast a Live Emergency Microphone Message
1)
Lift plastic cover and depress Switch.
The ‘Emergency Enable’ indicator will illuminate
2)
Pre-recorded message 2 being broadcast, (example):
Currently Broadcasting
Message 2
3)
Press ‘Select Zone’ of the desired zone or zones.
If no zones are selected an ‘All Call’ will be performed.
Zone Selected
4)
Press ‘Speak’ key
Broadcast Emergency
Microphone
Wait for the Speak Now indicator to illuminate and speak into the microphone at approximately 150mm.
5)
Release ‘Speak’ key at end of announcement
Return to Broadcasting
Message 2 (Example)
To Broadcast a Live Emergency Microphone Message using ‘EMERGENCY CALL ALL’
Note:
this is a factory fit option only, and is not fitted as standard.
In case of situations that prevent the console from functioning correctly (e.g. processor or communications
faults) the “EMERGENCY CALL ALL” button can be used.
This will broadcast a message to all zones and is at the highest Priority (i.e. it will override all other
broadcasts).
This method of paging is completely independent of all settings on the console and therefore should not be
used unless absolutely necessary.
1)
Press the ‘Emergency All Call’ button.
2)
Speak into the microphone.
3)
Release the ‘Emergency All Call’ button.
EMERGENCY
ENABLE
