36
ENGLISH
EN
Air filter
The air filter, if clogged, will reduce the engine performance. Check
and clean the filter element in warm, soapy water as required. Dry
completely before installing. If the element is broken or shrunk,
replace with a new one (MA1).
(1) Air filter
Fuel filter
When the engine runs short of fuel supply, check the fuel cap and the
fuel filter for blockage (MA2).
(1) Fuel filter
Spark plug
Starting failure and mis-firing are often caused by a fouled spark plug.
Clean the spark plug and check that the plug gap is in the correct
range.
IMPORTANT
Note that using any spark plug other than those designated may result in the engine failing
to operate properly or in the engine becoming overheated and damaged.
To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn
more with a socket wrench.
Tightening torque: 9.8~13.7 Nm
Muffler
WARNING
Inspect periodically the muffler for loose fasteners, any damage or corrosion. If any sign of
exhaust leakage is found, stop using the machine and have it repaired immediately. Note
that failing to do so may result in the engine catching on fire.
Spark arrester
(MA4)
The muffler is equipped with a spark arrester to prevent red hot carbon
from flying out of the exhaust outlet. Periodically inspect and clean as
necessary with a wire brush.
(1) Spark arrester
Summary of Contents for BXHT 6025
Page 20: ......
